Performance | CJ Pony Parts

Install JLT Oil Separators into your 2011-2013 GT/Boss 302!

Posted on 13. Jul, 2012 by Matt.

1

As exhaust gases circulate in your new Mustang’s engine, you want to keep any oil that might be mixed in where it belongs: Out of your intake manifold. With JLT’s oil separators, you can very simply and easily protect your intake manifold and your investment. In 2011-2013 GT/Boss 302 Mustangs, during the process of venting crankcase pressure [...]

Continue Reading

Gotta Have It Street claims second place at SCCA Autocross event!

Posted on 12. Jul, 2012 by Matt.

3

Our main goal with Gotta Have It Street is to make it into a true street performance Mustang that can drive on the street, perform at the drag strip AND still handle great. We’ve been on the street and the drag strip, and this past weekend finally gave us a chance to test out how [...]

Continue Reading

Gotta Have It Street sees a big boost on the latest dyno pulls!

Posted on 10. Jul, 2012 by Matt.

2

After a few more changes for Gotta Have It Street, it was time to see how these performance upgrades would translate on the dyno! If you recall, when we hit the dyno last month, Gotta Have It Street measured in at 349 horsepower and 313 ft./lb. of torque. Last week, we took Gotta Have It [...]

Continue Reading

Install BMR Lower Control Arms & Relocation Brackets onto your 2005-2013 Mustang!

Posted on 02. Jul, 2012 by Matt.

1

With the stock control arms providing lots of instability and erratic handling on the drag strip, we had to give Gotta Have It Race a lot more stability and performance for racing by using BMR’s Rear Lower Control Arms and Relocation Brackets! While the stock rear lower control arms may provide adequate performance on the [...]

Continue Reading

Install an Eibach Pro-Street-S Suspension Kit into your 2011-2013 Mustang!

Posted on 26. Jun, 2012 by Matt.

0

Right before our last NMRA event in Milan, MI, we decided to give Gotta Have It Street a suspension upgrade, which included a new Eibach kit and gave Gotta Have It Street more performance and an awesome new stance! Our Eibach Pro-Street-S Coil-Over Damper Kit not only gives us more precise turn-in response, improved handling, [...]

Continue Reading

Gotta Have Builds: Back from Milan, MI with a New Best Time

Posted on 20. Jun, 2012 by Andy.

4

Last month, the crew from CJ Pony Parts took Gotta Have It Race and Gotta Have It Street to the NMRA event at Maryland International Raceway and had such a great time, that we decided we wanted to do as many NMRA events as possible. The next event scheduled was on June 14 & 15 [...]

Continue Reading

A Whole New Look for Gotta Have It Race

Posted on 14. Jun, 2012 by Dan.

13

With the growing amount of Gotta Have It Green Mustangs showing up to NMRA events and online, we decided to give our new 2013 GT, Gotta Have It Race, a very distinct look to help set it apart from the rest! CJ Pony Parts & CJ Pony Service are excited to unveil the new & [...]

Continue Reading

Gotta Have It Street shows off more power in the latest dyno run!

Posted on 13. Jun, 2012 by Matt.

8

With only a few changes, Gotta Have It Street’s latest run on the dyno shows a big improvement! A few weeks ago, we mentioned that we added a 93 octane tune to Gotta Have It Street right before our last visit to Cecil County Dragway, which netted us 0.4 of a second and 3 mph [...]

Continue Reading

Install a JLT Cold Air Kit into your 2011-2013 Mustang!

Posted on 08. Jun, 2012 by Matt.

0

Want an easy way to get a big power boost from your 2011-2013′s V-8? Install a JLT Cold Air Kit into your Mustang! Both of CJ’s Gotta Have Builds cars–Gotta Have It Race and Gotta Have It Street–each recently received a beautiful, new JLT Cold Air Kit to boost their performance on the drag strip! [...]