Custom | CJ Pony Parts

Install a BMR Front Drive Shaft Safety Loop into your Mustang

Posted on 01. Nov, 2012 by Matt.

0

If your 2011-2013 Mustang is starting to hit the mid-11s on the drag strip, pay attention to this installation! The safety rules for NHRA require that any car that is running 11.49 or faster, or any car running slicks full time, have a drive shaft safety loop that will keep the drive shaft in the [...]

Continue Reading

Check out a unique 1970 Mach 1 Super Cobra Jet, soon up for auction!

Posted on 24. Sep, 2012 by Matt.

14

Get your bid ready! A one-of-a-kind 1970 Ford Mustang Mach 1 Super Cobra Jet is hitting the auction block! Vicari Auction Company is hosting their 16th annual Biloxi Auction on October 12 & 13 at the Mississippi Coast Coliseum & Convention Center in Biloxi, Mississippi, with over 400 cars up for bid, including several classic [...]

Continue Reading

Install Trufiber’s Carbon Fiber Door Sill Plates into your Mustang

Posted on 14. Sep, 2012 by Matt.

1

We still have one last area on Gotta Have It Street that hasn’t seen any carbon fiber: The interior! That gets fixed today with Trufiber’s Carbon Fiber Door Sill Plates. The pair of Door Sill Plates for Gotta Have It Street come from Trufiber’s TruCarbon line and give the interior a touch of the carbon [...]

Continue Reading

Install a Trufiber Taillight Panel onto your Mustang

Posted on 10. Sep, 2012 by Matt.

0

Gotta Have It Street recently received a new look under the hood, but not much carbon fiber anywhere else. So, we thought we’d add some to the exterior with this beautiful Taillight Panel from Trufiber. Just like every part from Trufiber’s TruCarbon line, this Taillight Panel features real infused carbon fiber and a show quality [...]

Continue Reading

Install a Trufiber Intake Manifold Cover & Coil Covers onto your Mustang!

Posted on 05. Sep, 2012 by Matt.

1

We started dressing up Gotta Have It Street’s engine compartment with a JLT Carbon Fiber Cold Air Kit. Then, we added some beautiful Scott Drake Billet/Carbon Fiber Engine Caps. Now, with this week’s installation, we add Carbon Fiber Coil Covers and a Carbon Fiber Intake Manifold Cover from Trufiber to build on the beautiful carbon fiber [...]

Continue Reading

Install a Push Button Start Kit onto your 2005-2013 Mustang

Posted on 10. Aug, 2012 by Matt.

0

Do you want the ease of push button starting for your 2005-2013 Mustang? Check out Silverhorse Racing’s Push Button Start Kits, which are some of the highest quality and best looking kits on the market. We loved them so much that kits were just installed on both Gotta Have It Race and Gotta Have It [...]

Continue Reading

Gotta Have It Street claims second place at SCCA Autocross event!

Posted on 12. Jul, 2012 by Matt.

3

Our main goal with Gotta Have It Street is to make it into a true street performance Mustang that can drive on the street, perform at the drag strip AND still handle great. We’ve been on the street and the drag strip, and this past weekend finally gave us a chance to test out how [...]

Continue Reading

Gotta Have It Street sees a big boost on the latest dyno pulls!

Posted on 10. Jul, 2012 by Matt.

2

After a few more changes for Gotta Have It Street, it was time to see how these performance upgrades would translate on the dyno! If you recall, when we hit the dyno last month, Gotta Have It Street measured in at 349 horsepower and 313 ft./lb. of torque. Last week, we took Gotta Have It [...]

Continue Reading

Install an Eibach Pro-Street-S Suspension Kit into your 2011-2013 Mustang!

Posted on 26. Jun, 2012 by Matt.

0

Right before our last NMRA event in Milan, MI, we decided to give Gotta Have It Street a suspension upgrade, which included a new Eibach kit and gave Gotta Have It Street more performance and an awesome new stance! Our Eibach Pro-Street-S Coil-Over Damper Kit not only gives us more precise turn-in response, improved handling, [...]