BMR | CJ Pony Parts

Install a BMR Front Drive Shaft Safety Loop into your Mustang

Posted on 01. Nov, 2012 by Matt.

0

If your 2011-2013 Mustang is starting to hit the mid-11s on the drag strip, pay attention to this installation! The safety rules for NHRA require that any car that is running 11.49 or faster, or any car running slicks full time, have a drive shaft safety loop that will keep the drive shaft in the [...]

Continue Reading

Install a BMR Adjustable Panhard Bar onto your 2005-2013 Mustang

Posted on 01. Aug, 2012 by Matt.

0

If you’ve seen Gotta Have it Street at any time in the last few weeks, you know how great it looks lowered. However, when you’re lowering any 2005-2013 Mustang, the rear end becomes off center. Therefore, for Gotta Have It Street, BMR provided their “must have” Adjustable Panhard Bar, which allowed us to simply and [...]

Continue Reading

Gotta Have It Street claims second place at SCCA Autocross event!

Posted on 12. Jul, 2012 by Matt.

3

Our main goal with Gotta Have It Street is to make it into a true street performance Mustang that can drive on the street, perform at the drag strip AND still handle great. We’ve been on the street and the drag strip, and this past weekend finally gave us a chance to test out how [...]

Continue Reading

Install BMR Lower Control Arms & Relocation Brackets onto your 2005-2013 Mustang!

Posted on 02. Jul, 2012 by Matt.

0

With the stock control arms providing lots of instability and erratic handling on the drag strip, we had to give Gotta Have It Race a lot more stability and performance for racing by using BMR’s Rear Lower Control Arms and Relocation Brackets! While the stock rear lower control arms may provide adequate performance on the [...]

Continue Reading

Install an Eibach Pro-Street-S Suspension Kit into your 2011-2013 Mustang!

Posted on 26. Jun, 2012 by Matt.

0

Right before our last NMRA event in Milan, MI, we decided to give Gotta Have It Street a suspension upgrade, which included a new Eibach kit and gave Gotta Have It Street more performance and an awesome new stance! Our Eibach Pro-Street-S Coil-Over Damper Kit not only gives us more precise turn-in response, improved handling, [...]

Continue Reading

Gotta Have Builds: Back from Milan, MI with a New Best Time

Posted on 20. Jun, 2012 by Andy.

4

Last month, the crew from CJ Pony Parts took Gotta Have It Race and Gotta Have It Street to the NMRA event at Maryland International Raceway and had such a great time, that we decided we wanted to do as many NMRA events as possible. The next event scheduled was on June 14 & 15 [...]

Continue Reading

Gotta Have It Street’s been lowered!

Posted on 12. Jun, 2012 by Matt.

3

While we’ve made a few modifications to Gotta Have It Street already, this weekend’s installations gave it a whole new look–Gotta Have It Street has been lowered! After adding some great looking Ford Racing GT500 Performance Package Wheels a few weeks ago, we felt we really needed to lower Gotta Have It Street, one of [...]

Continue Reading

More work, then more racing for Gotta Have Builds!

Posted on 30. May, 2012 by Matt.

5

Our Gotta Have Builds cars have been busy this past week, getting some new modifications and then visiting Cecil County Dragway! Last week, we started our first round of power mods to Gotta Have It Race and Gotta Have It Street. We installed two cold air intakes from JLT, one in Carbon Fiber and one [...]

Continue Reading

Install a BMR Rear Sway Bar Relocation Kit into your 2005-2013 Mustang!

Posted on 25. May, 2012 by Matt.

0

Do you have a 2005-2013 Mustang? Do you want to throw some 15″x10″ drag wheels on it and hit the track? If so, you will want this handy BMR Rear Sway Bar Relocation Kit so your new drag wheels won’t hit the rear sway bar. It’s easy to install, as you can see from this [...]