2013 | CJ Pony Parts

Install a Trufiber Intake Manifold Cover & Coil Covers onto your Mustang!

Posted on 05. Sep, 2012 by Matt.

1

We started dressing up Gotta Have It Street’s engine compartment with a JLT Carbon Fiber Cold Air Kit. Then, we added some beautiful Scott Drake Billet/Carbon Fiber Engine Caps. Now, with this week’s installation, we add Carbon Fiber Coil Covers and a Carbon Fiber Intake Manifold Cover from Trufiber to build on the beautiful carbon fiber [...]

Continue Reading

Gotta Have Builds drag race and race autocross!

Posted on 04. Sep, 2012 by Matt.

1

After a busy weekend two weeks ago, both Gotta Have Builds raced two more times during the last weekend in August, at Beaver Springs Dragway and another SCCA Autocross event! Friday Night Street Racing On Friday night, August 24, Bill and Rick took Gotta Have It Race and Gotta Have It Street back to Beaver Springs Dragway [...]

Continue Reading

Upgrade the underhood look of your 2005-2013 Mustang!

Posted on 29. Aug, 2012 by Matt.

5

When we started planning Gotta Have It Street, we were envisioning a head turning, jaw dropping Mustang that performs as good as it looks. To achieve that great look under the hood, we needed Scott Drake’s billet/carbon fiber engine caps and dipstick handles. Scott Drake offers a full line of underhood dress-up engine caps and [...]

Continue Reading

Gotta Have It Street enjoys a busy late summer weekend!

Posted on 24. Aug, 2012 by Matt.

1

As the summer winds down and the temperature cools down, the schedule for Gotta Have Builds has been filling up, especially for this past weekend. In fact, the Gotta Have Builds team was going to be busy from Friday through Sunday, with some racing, a car show, and autocross on the agenda during the weekend. [...]

Continue Reading

Shelby unveils new models at the Monterey Motorsports Reunion!

Posted on 21. Aug, 2012 by Matt.

6

If you follow CJ’s on any of our social media platforms, yesterday we showed you the special, one-off 2013 Shelby Mustang GT500 Cobra that was designed as a tribute to Carroll Shelby and was unveiled on Saturday. However, Shelby American had another surprise up their sleeves: The new 2013 Shelby GT500 Super Snake! Both GT500 [...]

Continue Reading

Gotta Have Builds race at Beaver Springs Dragway

Posted on 13. Aug, 2012 by Matt.

0

It had been a few weeks since Gotta Have it Race and Gotta Have It Street had been to the drag strip, so Bill and Rick planned to take both cars up to Beaver Springs Dragway for their Friday Night Street Race! To prepare for the trip to the track, the Gotta Have Builds team [...]

Continue Reading

Install a Push Button Start Kit onto your 2005-2013 Mustang

Posted on 10. Aug, 2012 by Matt.

0

Do you want the ease of push button starting for your 2005-2013 Mustang? Check out Silverhorse Racing’s Push Button Start Kits, which are some of the highest quality and best looking kits on the market. We loved them so much that kits were just installed on both Gotta Have It Race and Gotta Have It [...]

Continue Reading

Install new Coil Covers onto your 2011-2013 Mustang GT

Posted on 06. Aug, 2012 by Matt.

0

Gotta Have It Race’s engine just received an upgrade, thanks to a new set of coil covers! Today’s install video shows just how easy it is to add new coil covers and give your engine compartment a new look. As you ponder what you want the engine area of your 2011-2013 Mustang GT to look [...]

Continue Reading

Install a BMR Adjustable Panhard Bar onto your 2005-2013 Mustang

Posted on 01. Aug, 2012 by Matt.

0

If you’ve seen Gotta Have it Street at any time in the last few weeks, you know how great it looks lowered. However, when you’re lowering any 2005-2013 Mustang, the rear end becomes off center. Therefore, for Gotta Have It Street, BMR provided their “must have” Adjustable Panhard Bar, which allowed us to simply and [...]