2013 | CJ Pony Parts

How fast will Gotta Have It Race go in this weekend’s final race of the year?

Posted on 07. Nov, 2012 by Matt.

4

The Gotta Have Builds team has learned a lot about Gotta Have It Race during the last few outings and feels they are headed in the right direction, and ready for this weekend’s final race of the year! Before the 5.0 Shootout at Maryland International Raceway in late September, the team added a new Ford Racing [...]

Continue Reading

Install a BMR Front Drive Shaft Safety Loop into your Mustang

Posted on 01. Nov, 2012 by Matt.

0

If your 2011-2013 Mustang is starting to hit the mid-11s on the drag strip, pay attention to this installation! The safety rules for NHRA require that any car that is running 11.49 or faster, or any car running slicks full time, have a drive shaft safety loop that will keep the drive shaft in the [...]

Continue Reading

SEMA 2012: Ford Racing unveils Twin Turbo Cobra Jet concept!

Posted on 31. Oct, 2012 by Matt.

0

We all know the current Cobra Jet Mustang is already really fast. However, Ford Racing just upped the ante by unveiling a new Cobra Jet concept at SEMA that is EVEN FASTER! Both the current Cobra Jet Mustang and the concept share the Mustang’s 5.0L Coyote V8, but that’s where the similarities end. The current [...]

Continue Reading

Gotta Have It Race and Bill Tumas are featured in the December issue of Race Pages!

Posted on 24. Oct, 2012 by Matt.

4

Congratulations to our own Bill Tumas, who, with Gotta Have It Race, is featured as the cover article in the December 2012 issue of Race Pages! Race Pages is the official magazine of the NMRA Keystone Automotive Ford Nationals series, which is the series that the entire Gotta Have Builds team ran in this summer. Bill [...]

Continue Reading

Gotta Have Builds compete at Beaver Springs Friday Night Street Races!

Posted on 16. Oct, 2012 by Matt.

3

As the days get shorter and the weather gets cooler, the racing season is rapidly coming to a close. With this in mind, the Gotta Have Builds team wanted to make sure that they took Gotta Have It Race and Gotta Have It Street up to Beaver Springs at least one more time for some racing! [...]

Continue Reading

Gotta Have It Race closes out the NMRA season!

Posted on 12. Oct, 2012 by Matt.

3

The weekend of October 4th-7th was the final event of the 2012 NMRA season, so the Gotta Have Builds team loaded up Gotta Have It Race and made the 12 hour trip to Beech Bend Raceway in Bowling Green, Kentucky for the 14th Annual Nitto Tire NMRA World Finals. Various members of the Gotta Have [...]

Continue Reading

Install Trufiber’s Carbon Fiber Door Sill Plates into your Mustang

Posted on 14. Sep, 2012 by Matt.

1

We still have one last area on Gotta Have It Street that hasn’t seen any carbon fiber: The interior! That gets fixed today with Trufiber’s Carbon Fiber Door Sill Plates. The pair of Door Sill Plates for Gotta Have It Street come from Trufiber’s TruCarbon line and give the interior a touch of the carbon [...]

Continue Reading

Install a Trufiber Taillight Panel onto your Mustang

Posted on 10. Sep, 2012 by Matt.

0

Gotta Have It Street recently received a new look under the hood, but not much carbon fiber anywhere else. So, we thought we’d add some to the exterior with this beautiful Taillight Panel from Trufiber. Just like every part from Trufiber’s TruCarbon line, this Taillight Panel features real infused carbon fiber and a show quality [...]

Continue Reading

Gotta Have Builds take on the competition at the NMRA Ford Expo!

Posted on 07. Sep, 2012 by Matt.

3

After last Friday’s race at Beaver Springs Dragway, Gotta Have It Race and Gotta Have It Street were ready to do some more racing! With the NMRA’s 6th event on the horizon for Labor Day Weekend, the Gotta Have Builds team headed to the National Trail Raceway in Ohio to race in the Roush Super [...]